Description
Nozzle boot/switch an affiliated device outside the fuel dispenser used for holding nozzle, fuel dispenser nozzle boot can be equipped with switch.
Aluminum nozzle boot, plastic nozzle boot, reinforced nylon are available.
Fuel dispenser nozzle boot with switch assembly is designed to provide a low cost and convenient forced switch nozzle hang up. The compact housing can be field mounted to almost any pole or other convenient location that provides fuel line access. Nozzle holder with Hall switch and nozzle holder with megnetic switch are available.The explosion proof internal switch may be used to control an isolation solenoid, pump motor starter, or other process control device. Placing the nozzle in the nozzle boot forces the switch off.
Nozzle holder made of aluminium alloy will oxidation, plastic nozzle holder will never oxidation.Plastic nozzle holder is in black color with the materials of reinforced nylon. Our nozzle holders are applicable for many kinds of fuel dispenser, It is convenient for the users who just hold the nozzle to inject fuel and put it in the holder after injecting.
Our fuel dispenser nozzle holder with switch is solid,lightweight and
cost-effective, convenience, flexibility, durability, and ease of installation. It is widely applicable to Vapor recovery fuel nozzle and ordinary fuel nozzles.
1.Technical Specification
Product Name | Nozzle boot with switch |
Material | Aluminum alloy,Reinforced nylon, Plastic |
Application | Fuel dispenser |
Advantage | Firm, light weight and more cost-effective |
Characteristic | equipped with switch |
Selling point | Nozzle holder is an affiliated device outside the fuel dispenser used for holding nozzle,and it can be equipped with switch. |
Advantage | 1.Firm,lightweight and more cost-effective. 2.Nozzle holder made of aluminium alloy will oxidation,plastic nozzle holder will never oxidation. 3.Plastic nozzle holder is suitable for vapor recovery automatic nozzle and ordinary nozzles,like 11A and 120 nozzles. |
上一页:Solenoid valve 下一页:最后一页